Home Email
HOME ABOUT US PRODUCTS TECHNOLOGY  CONTACT US
 

                                                                                                                                                                Home > product show
    Magnetic Powder
      → Presintered Ferrite Powder
      → Bonded Ferrite Powder
      → Magnetic Compound
      → AlNiCo Magnetic Powder
      → NdFeB Magnetic Powder
      → SmCo Powder
 
 
 
    
  NdFeB Magnets
  Ferrite Magnets
  SmCo Magnets
  Alnico Magnets
  Fridge Magnets
  Flexible Sheet
  Magnetic Powders
  Magnetic Assembly
 
 
 
    
    
    
    
Tel: +86-23-62534876
Fax: +86-23-62534875
E_mail: xinchang@ndfeb-magnet.cn
 http://www.ndfeb-magnet.cn

 

PRODUCT > MAGNETIC POWDER > BONDED FERRITE POWDER

Bonded ferrite powders are the main raw mwterials for producing bonded ferrite magnets, The high-property powders are suitable for extruding, rolling or injecting process Specifications of XCF Plastic Bonded Ferrite Magnetic Materials
XCF series Strontium plastic bonded ferrite magnetic powders are suitable for making various bonded magnets. They have good compatibility with different kinds of composite size, such powders have high filling capacity. They can be used for making different kinds of magnets by extrusion or injection molding.

The magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing. We supply the magnetic ferrite powders in three forms: granular powder (6-12mm), coarse powder (3-6um), fine powder (0.75-1.05um) according to the needs of clients. The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder. Anisotropic magnetic ferrite powder has better orientability.

1. Material Properties

Trade mark Material Characteristics of products Forming methods
Br(mT) bHc(kA/m) iHc(kA/m) (BH)max(kj/m3) Mean size
(¦Ìm)
Typical Min Typical Min Typical Min Typical Min
XCF-1 BaFe12O19 150 140 95.5 87.5 183 167 3.98 3.58 2-4 Extrusion
or
Calendering
XCF-2 BaFe12O19 180 175 119 115 183 167 5.97 5.57 1.1-1.4
XCF-2b BaFe12O19 180 175 111 107 151 143 5.57 5.17 1.5-1.8
XCF-2c BaFe12O19 180 175 111 107 151 143 5.57 5.17 1.8-2.1
XCF-2S SrFe12O19 180 175 119 115 183 167 5.97 5.57 1.1-1.4
XCF-2Sb SrFe12O19 180 175 111 107 159 143 5.57 5.17 1.5-1.8
XCF-2Sc SrFe12O19 180 175 111 107 159 143 5.57 5.17 1.8-2.1
XCF-3 SrFe12O19 250 240 167 159 223 199 11.9 11.1 1.3-1.6 Magnetic orientation
XCF-4 SrFe12O19 245 235 159 151 223 215 11.1 10.4 1.3-1.6 Calendering
orientation
XCF-4b SrFe12O19 250 240 175 167 255 239 11.9 11.1 1.0-1.3
XCF-5 BaFe12O19 85 83     223 215     0.50-0.75 Film coating

2. Procedure Summaries
a. Before production,the powders should avoid being humidified,and avoid being mixed with other material and impurity.
b. The mixture ratio of binders and plasticizers should be defined according to the grade of the powder.The powder and binders and plasticizers should be mixed uniformly.
c. The working temperature of extruding should be controlled between 50OC to 90OC.(calendaring plate is usually between 80OC to 120OC)
d. Please adjust the extruding speed, calendaring speed and times,according to the property required.

                                                                   

 
 

                      

Copyright © ,XinChang Magnet Industry Co.,Ltd. All rights reserved.