Model	XCD-1100/1-6 XCD1100/1-6T	XCD-1100/1.5-12 XCD1100/1.5-12T	XCD-1100/2-24 XCD1100/2-24T
Power source	AC 220V,50-60HZ,10A
Max.output current	10,000A	15,000A	20,000A
Charging time	1second	2second	4second
Output voltage	50-1.100V(continuously variable)
Capacitance	600μF	1,200μF	2,400μF
Max.output energy	363J	726J	1,452J
Main output element	SCR
Dimension	350W x 500D x 800H
Weight	Approx.80kg	Approx.100kg	Approx.120kg

 

 

 

 

 

 

 

 

 

HIGH CURRENT TYPE MAGNETIZER/DEMAGNETIZER

This type is featured by its extremely short magnetizing current pulse width,and little heat generation in the magnetizing fixture.lt is most suitable for magnetizing multi-pole rare-earth(annulus multi-pole and plane multi-pole),motors and brushless motors.The magnetizer is error proof even at output short circuit conditions.

 

SPECIFICATION:

Model	XCD-2000/5-16 XCD-2000/5-16T	XCD-2000/10-32 XCD-2000/10-32T	XCD-2000/5-16n XCD-2000/5-16nT	XCD-2500/5-16n
Power source	AC 220V,50-60HZ,30A		AC 380V,50-60HZ,30A	AC 220/380V,30A
Max.output current	50,000A	10,000A	50,000nA	50,000nA
Charging time	5second	9second		5/9second
Output voltage	50-1,100V(continuously variable)			50-2,500V
Capacitance	1,600μF	3,200μF	1,600nμF	1,600nμF
Max.output energy	3,200J	6,400J	3,200nJ	3,200nJ
Main output element	SCR
Dimension	600W x 650D x 1,600H	600W x 800D x 2,000H	600W x 800D x 2,000H	600W x 800D x 2,000H
Weight	Approx.260kg	Approx.400kg	Approx.(350+150n)kg	Approx.(350+150n

LARGE CAPACITANCE TYPE MAGNETIZER/DEMAGNETIZER

This type can be used both in magnetizing and demagnetizing permanent magnets simply by switching.This series of magnetizer/demagnetizer is used phase modulation technology and constant current charging.They are favorably suitable for magnetizing and demagnetizing magnets with high coercive force materials,such as rare-earth,motors,large loudspeakers and all magnet materials available today. The magnetizer is error proof even at output short circuit conditions

SPECIFICATIOIN:

Model	XCD-1100/1.5-48 XCD1100/1.5-48T	XCD-1100/2.5-96 XCD1100/2.5-96T	XCD-1100/4-192 XCD1100/4-192T	XCD-1100/5-384 XCD1100/5-384T	XCD-1100/5-384n XCD1100/5-384nT
Power source	AC 220V,50-60HZ,40A			AC 380V,50-60HZ,40A
Max.output current	15,000A	25,000A	40,000A	50,000A	50,000A
Charging time	3second	5second	9second		20second
Output voltage	50-1,100V(continuously variable)
Capacitance	4,800μF	9,600μF	19,200μF	38,400μF	38,400nμF
Max.output energy	2,904J	5,808J	11.616J	23.232J	23.232nJ
Main output element	SCR
Dimension	600W x 650D x 1,600H		600W x 800D x 2,000H	(600x2)Wx800Dx2,000H	600(n+1)Wx800Dx2,000H
Weight	Approx.200kg	Approx.260kg	Approx.400kg	Approx.900kg	Approx.(300+600n)kg

INTELLIGENT DEFINED-VALUE MAGNETIZER/DEMAGNETIZE

This magnetizer is treated computer control and measure.lt has function of precise magnetizing,demagnetizing,and reducing magnetism with closed loop control for magnetic pieces,even though magnetic properties are very dispersion,after magnetized,they would be achieved completely uniformity.The precise control of magnetizing field intensity would reach enough uniformity with opened control.The residual magnetism of magnetic pieces would be less than 0.002T with the precise demagnetizing;the magnetizer is adopted combination for the operation sequence of magnetizing.demagnetizing,and screening,it is suitable for kinds of assembly lines.

The intelligent defined-value magnetizer/demagnetizer can follow your inclinations for products.

SPECIFICATION:

Model	XCD-2000/5-16B	XCD-2000/10-32B
Power source	AC 220V,50-60HZ,30A
Max.output current	50,000A	100,000A
Charging time	5second	9second
Output voltage	50-2,000V(continuously variable)
Capacitance	1,600μF	3,200μF
Max.output energy	3,200J	6,400J
Main output element	SCR
Dimension	600W x 650D x 1,600H	600W x 800D x 2,000H
Weight	Approx.260kg	Approx.400kg

AUTOMATIC TEST SYSTEM FOR MAGNETIZATION

This system,composed of magnetizer,computer test system and magnetization device,can completely meet the demands of on line magnetization and test for motor production line.The magnetic field and flux distribution test of motor magnet is finished in the process of magnetization.Meanwhile,the wave-form of magnetic field, strength of surface magnetic field, the max flux,the min flux and the average of flux will be displayed on the screen. Subject to computer's design of max and min strength of surface magnetic field and flux on magnet,the system realizes alarm when motors work out of range,which assures the consistence of products.The production time of each on line motor and parameter of magnetic field will be stored in the system and the data will be printed by it. ----Different capacity magnetizers can be used in this system that is fit for producing many kinds of motors. ----The operation under windows98 is quick and easy. ----Magnetization fixtures are controlled by servo system;motors are loaded and unloaded automatically. ----The wave-form and data are displayed directly,which makes it easy to sieve the products. ----The data are stored and printed in order to be easily checked.

AUTOMATIC MAGNETIZER FOR MULTI-POLE MAGNET

This machine can complete the automatic feed, magnetization and classification test.lt makes labour's complex work easier and avoids the unstable factor. lt's evident that this of machine has superiority in magnetizing multi-pole magnet. The total process includes feed, magnetization, classification test, siving of the qualified/unqualified and sepration of magnets, which can be completed sequentially. With the help of PLC contral and pneumatic device, the operation is quick,simple and high efficient, This machine is fit for magnetization in batch.